

Two optimization types are available in the tester. You can select the appropriate one on the Settings tab of the Strategy Tester.
Slow Complete Algorithm
In this mode, optimization runs are performed for all possible combinations of values of input variables selected on the appropriate tab.
This method is the most precise one. However, running the Expert Advisor with all possible combinations takes much time.
Fast Genetic Algorithm
This type of optimization is based on the genetic algorithm of search for the best values of input parameters. This type is much faster than the first one and is almost of the same quality. The slow complete optimization that would take several years can be performed within several hours using the genetic algorithm.
Each individual has a specific set of genes which corresponds to the set of their parameters. Genetic optimization is based on the constant selection of the most "adapted" parameters (values that give the best result). In the general form, the algorithm can be represented the following way:
 From the total number of all possible combinations of parameters, two populations (sets) are selected by a random sample;
 Both sets are tested and the one with the best results (according to the optimization criterion) is left;
 The set members are randomly crossed with one another, undergoing random mutations and inversions of parameters;
 The descendants are sorted out by the best results, and crossing repeats;
 Sorting and crossing operations are repeated as long as there is improvement of results (the best result among descendants is better than the best one among the parents). If the optimization criterion values are not improved during several crossings (generations), the optimization process is completed.
Number of Test Runs
During the genetic optimization, the number of test runs is much lower, which provides quickness of optimization. After the start of the genetic optimization, an estimated number of test runs is displayed on the Settings tab. It is calculated by the following formula:
Population size * (Unconditional number of generations + Number of generations for convergence estimation)
where:
 Population size is calculated based on the number of possible combinations of optimization parameters, may range from 64 to 256;
 Unconditional number of generations may range from 15 to 31. It is defined by the presence of optimization criterion improvement. 15 generations are tested in all optimizations. If a generation within the range between 15 and 31 does not have any improvement of the optimization criterion, an additional test of the next generations is started for convergence estimation.
 Number of generations for convergence estimation is calculated as one third of the unconditional number of generations. If the unconditional number of generation is 18 (the 17th generation has shown the best result and there are no improvements shown by the 18th generation) then another 5 generations are tested: the 18th generation has not shown any improvement, and for the estimation of convergence we need 18/3 = 6 generations without improvements of the optimization criterion. If there are no improvements shown by the specified number of generations, optimization is stopped.

Optimization Criterion
An optimization criterion is a certain factor, which value defines the quality of a tested set of parameters. The higher the value of the optimization criterion, the better the testing result with the given set of parameters. Such a factor can be selected in a field to the right of "Optimization" on the Settings tab.
The optimization criterion is required only for the genetic algorithm. 
The following optimization criteria are available:
 Balance max — the highest value of the balance.
 Profit Factor max — the highest value of the profit factor.
 Expected Payoff max — the highest value of the expected payoff.
 Drawdown max — in this case, the drawdown level is taken into account: Balance/Equity drawdown.
 Recovery Factor max — the highest value of the recovery factor.
 Sharpe Ratio max — the highest value of the Sharpe ratio.
 Custom max — the optimization criterion here is the value of the OnTester() function in the Expert Advisor. This parameter allows using any custom value for the optimization of Expert Advisors.
Another option is to use "Complex Criterion max". This is an integral and complex measure of a test pass quality. It measures multiple parameters:
 Number of Deals
 Drawdown
 Recovery Factor
 Expected Payoff
 Sharpe Ratio
By using this criterion, you can see that the highest value of one parameter (for example the profit) is not always the best option in terms of the complex analysis. The complex criterion gradually selects the best passes: firstly, by the number of deals, then by the Expected Payoff, Recovery Factor, and so on. The new option allows reception of the best optimization passes according to all parameters. Furthermore, you can select the optimal pass based on the desired parameter, such as the highest profit.
All Symbols Selected in Market Watch
Unlike the above described optimization types, this one allows to test an Expert Advisor with the same input parameters, but with different symbols. Only the main symbol of testing is changed in each pass, i.e. the symbol of chart the EA would be attached to.
Optimization is performed only for symbols that are currently chosen in the Market Watch. So you can manage optimization by adjusting the set of selected symbols.
